Pure Storage FlashBlade Configuration

Pure Storage develops all-flash data storage hardware and software products. Pure Storage FlashBlade is a private object storage solution that customers typically deploy on-premises on any industry-standard x86 server.

Nasuni enables customers to leverage Pure Storage FlashBlade for high-performance file storage. Using Nasuni’s object storage-based global file system with Pure Storage FlashBlade, customers can modernize legacy NAS and file server infrastructure and achieve new levels of data protection and cross-office file collaboration.

Configuration

Nasuni integrates with Pure Storage FlashBlade using the Nasuni Connector for Dell EMC ECS.

Tip: With on-premises object storage, if you are using an HTTPS proxy, consider including the hostnames of the target endpoint for the on-premises object storage in the Do Not Proxy specification. Otherwise, the proxy server might not allow data traffic or might slow down data traffic.

To configure Nasuni for Pure Storage FlashBlade, follow these steps:

1. Ensure that port 443 (HTTPS) is open between the Nasuni Edge Appliance and the object storage solution.

2. Click Configuration. On NMC, click Account.

3. Select Cloud Credentials.

4. Click Add EMC ECS Credentials.
   Alternatively, click Add New Credentials, then select EMC ECS from the drop-down menu.

5. Enter the following information from the Pure Storage FlashBlade cluster:
   Name: A name for this set of credentials, which is used for display purposes, such as ObjectStorageCluster1.
   Access Key ID: The bucket or container user name for authentication.
   Secret Access Key: The bucket or container user password for authentication.
   Hostname: The hostname for the location of the object storage solution.
   Verify SSL Certificates: Select this checkbox only if the endpoint has a public certificate.
   Filers (on NMC only): The target Nasuni Edge Appliance(s).

6. Click Save Credentials.

At this point, you can begin adding volumes to the Nasuni Edge Appliance.

Adding volumes

To add volumes with Pure Storage FlashBlade, follow these steps:

1. Click Volumes, then click Add New Volume. The Add New Volume page appears.

2. Enter the following information for the new volume:
   Name: Enter a human-readable name for the volume.
   Cloud Provider: Select EMC ECS.
   Credentials: Select the Cloud Credentials you defined in step 5 for this volume, such as ObjectStorageCluster1.
   
   For the remaining options, select what is appropriate for this volume.

3. Click Save.

This creates a new volume with Pure Storage FlashBlade.

Copyright © 2010-2024 Nasuni Corporation. All rights reserved.